Mounting Instructions: Miniature slip rings and slip rings without flange 2021-07-10
The outer diameter of the miniature slip ring is between 5mm to 20mm, the mounting space is very compact and narrow, the torque is relatively low, even if it is not fixedly installed, it will not affect its normal operation and performance, so the most common methods include set screws, adhesives, or O-rings.
Mounting Instructions: Pancake slip rings 2021-07-10
The Pan cake slip ring has two relatively rotating upper and lower slip rings, when installing, it is necessary to fix the rotor part, and then insert the anti-rotation bar into the anti-rotation tab to ensure a certain degree of freedom. Do not forcibly fix the anti-rotation tab, otherwise it may damage the slip ring or shorten the service life.
Mounting Instructions: Capsule slip ring with stator flange 2021-07-10
Capsule slip ring is designed with flange, and to be mounted with screws, as the flange is a part of stator side, it should be fixed on the static part. The rotor should be driven with a flexible drive coupling to accommodate any differences in the assembly and slip ring’s axis of rotation.
Mounting Instructions: Capsule slip ring with rotor flange 2021-07-10
The slip ring rotor and stator are difficult to ensure concentricity when mounting, secure rotor flange on the slip ring to the rotating body with 4 screws on the rotating part (or transition flange of rotating part).
Mounting Instructions: Through-bore slip ring with flange 2021-07-10
The slip ring rotor and stator are difficult to ensure concentricity when mounting, secure the slip ring to the rotating shaft with 4 screws.
Mounting Instructions: Through-bore slipring 2021-06-13
空心轴导电滑环安装方式介绍-因为导电滑环转子和定子在安装的时候很难保证同心，建议用4个紧定螺钉将导电滑环固定在旋转轴上，锁紧螺丝前，请先转动导电滑环，让导电滑环自动找正转轴中心后，再锁紧螺丝。
