Mounting Instructions: Miniature slip rings and slip rings without flange

Mounting Instructions: Miniature slip rings and slip rings without flange

The outer diameter of the miniature slip ring is between 5mm to 20mm, the mounting space is very compact and narrow, the torque is relatively low, even if it is not fixedly installed, it will not affect its normal operation and performance, so the most common methods include set screws, adhesives, or O-rings.

Mounting Instructions: Miniature slip rings and slip rings without flange

3D's mounting example of Miniature slip rings

Mounting instructions:

1. The rotor of the slip ring can be directly driven by lead wires without fixing.

2. Put the slip ring into the stator sleeve, fix it on the stator side and lock it with screws.

Notes:

1. The slip ring must not bear other objects, and the wire must not be pulled by external forces.

2. When mounting the slip ring, do not damage the wire insulation.

3. Slip rings are precision electrical components, and should be protected from dust and moisture.

4. Make sure secure the screws

5. The stator lead is far away from the rotating shaft, and the rotor lead is far away from the fixed part to avoid scratching the wires during rotation.