Quality control of the automated production of slip ring
Innovative slip ring signal loop processing
● In traditional slip ring, the loop of slip ring is not dense enough due to the electroplating process, the surface roughness is as high as 100-500μm, Frequent flashoverand it is easy to wear the brush wire prematurely, resulting in dust accumulation and shortening the life span of the brush wire.
● 3KM Link unique slip ring contact material is treated with wear-resistant and corrosion-resistant super-hard precious metal surface treatment technology, its strength, hardness and conductivity are superior to the international military standards hardness. making the ring surface of the slip ring is very smooth, the surface roughness is less than 0.5μm, which avoids the flashing phenomenon of the brush wire, greatly reduces the phenomenon of early dust accumulation, and the fluctuation resistance value is also significantly reduced, as low as 0.001Ω, and extend the life span of brush wires.
Innovative special grease for slip ring bearings
The volatility of grease has a serious impact on the optical components and optical products in slip ring, anomalies are also difficult to detect.Therefore, suitable special lubricating grease must be used.
● Very low saturated vapor pressure and low volatilitygrease, which prevents grease pollution to optical components and ensures long-term lubrication;
● Extremely strong chemical inertness: it is not easy to be denatured with polluting gases in the air, which affects the lubrication performance of the product;
● Ultra-wide working temperature range: (-90℃ ~ 200℃): The product is easier to meet special conditions of use.
